By Peter Henshaw

It normally takes two or three years to design and prototype a new motorcycle. Using existing components saves time [as with the Ducati Monster – ed.], but even with cutting corners, the process takes many, many months.  But the design engineers at Norton-Villiers, Bob Trigg and Bernard Hooper, were given just eleven weeks in 1967 to come up with a new model for the aging Norton lineup.  There was no time to develop a new motor, so Norton’s existing 750cc twin-cylinder engine was a given, but they had to find a way to tame its fearsome vibration.  Trigg and Hooper came up with the Norton Commando, a hastily designed stopgap that became an icon, keeping Norton afloat for the best part of a decade. And, let’s just repeat this, they did it in eleven weeks. How was this possible?

The original 1949 Norton Model 7 Dominator, designed by Bert Hopwood to correct some of the Triumph Speed Twin’s faults.  Like the Speed Twin did with the Tiger 90 chassis in 1936, the Model 7 engine fit into Norton’s International chassis, and carried the post-war Manx aesthetic. It was never as sexy as the Speed Twin or Tiger 100, though. [VintagentArchive]
A Troubled Past

The roots of the Commando story stretch back to 1949, when Norton launched the Dominator, a 500cc parallel twin to rival Triumph’s incredibly successful Speed Twin. Norton’s twin was drawn up by Bert Hopwood, one of the giants of Britain’s postwar motorcycle industry, who tried to cure a few flaws in Edward Turner’s Triumph motor.   Turner’s engine had a tendency to run hot, it was mechanically noisy, and it leaked oil through its many components – especially the separate rocker boxes and pushrod tubes.  Hopwood’s Norton twin had well splayed exhaust ports to improve airflow, a single chain-driven camshaft to reduce noise, plus integral pushrod tubes and rocker mounts to prevent (some of the) leaks.

The new Norton parallel twin Model 7 Dominator was well received, but Bert Hopwood left Norton before it went on sale, in frustration over the company’s fixation with racing its increasingly outdated big singles. Six years later he was invited back, as Managing Director, in a bid to turn around the company’s ailing fortunes. With a new emphasis on road bikes, talented engineers like Doug Hele were promoted or brought in; tighter financial controls were introduced and a deal was done with Joe Berliner to distribute Nortons in the growing North American market.  A smaller twin was introduced, the 250cc Jubilee, and Norton made a £300,000 profit in 1958.

Despite the profits, Norton’s parent company – Associated Motorcycles (AMC), owner of Matchless, AJS, James, Villiers, and Francis-Barnett – was leaking cash, and absorbed Norton’s profits into the group. In the summer of 1966 AMC reached a crisis point, and when a deal to source working capital from Joe Berliner fell through, the company went bust.

Dennis Poore in his early racing years [Wikipedia]
That’s when Dennis Poore stepped in. As the owner of Manganese Bronze Holdings, he’d been eyeing AMC for some time, and was able to buy the company cheaply during its bankruptcy. Poore was an interesting character: unlike much of the British motorcycle industry’s management, he came from upper-class stock. Educated at Eaton and Cambridge University, he was a Wing Commander in the RAF during World War II before making money in the City and following a sideline as a successful racing car driver. Full of energy and charm, he must have seemed like just the chap to revive Britain’s number three (after BSA/Triumph) motorcycle brand.

Mr Poore wasted no time, dropping the slow-selling James and Francis-Barnett lines from the AMC stable as well as Norton’s smaller Jubilee, Navigator, and Electra twins. He knew what the trimmed-down Norton-Villiers division needed was a new flagship motorcycle. The Norton Atlas 750, launched in 1964, was a torquey beast – the biggest British twin on the market, with the Royal Enfield Interceptor – but it suffered appalling vibration above 5000rpm, because the increase in engine capacity came via a long-stroke crankshaft: there was no money to design new crankcases for a short-stroke 750cc engine, or add modern balancing shafts.

The Norton P10 prototype, which proved mechanically unsound, as well as having an ugly engine design – unacceptable for a Norton.  Despite the chaos of the British industry in the 1960s, the P10 engine should never have left the drawing board. [Peter Henshaw]
Norton had been developing a replacement engine that looked ideal on paper.  The ‘P10’ was an 800cc parallel-twin with double overhead cams and a five-speed unit-construction gearbox. To quell vibration, the engine was mounted in rubber.  But the prototype P10 turned out to be a lemon: the camshafts were driven by a single long chain which rattled and shed rollers,  the engine was heavy, and it leaked oil. “It would go out on road test,” recalled test rider John Wolverson later, “and when it came back it looked as if someone had poured a gallon of oil all over it.” The rubber mounts allowed the engine to shift under acceleration, jumping the sprockets in the lower gears. Finally, to add insult to injury, it made no more power than the Atlas.

A redesign got underway in early 1967, aiming to have the new bike ready for the Earls Court Show in September. It would use the P10’s bottom end with a new top end using two short timing chains and simple bucket-and-shim tappets.  While this was heading in the right direction, there simply wasn’t time to develop this all-new engine in six months.  In desperation, Poore summoned design engineers Bob Trigg and Bernard Hooper to a board meeting in London. Both were young, with impressive pedigrees: Trigg had cut his teeth at BSA and Ariel before joining Norton-Villiers, while Hooper had worked with the renowned Hermann Meier on racing two-strokes.

Bob Trigg recalled, “We were would told that if we didn’t have a new bike at Earls Court that year, the company would go bust. And we couldn’t have a new engine, so we would have to use the Atlas, due to lack of time and money.” And one more thing, they had to find a way to eliminate the big twin’s vibration, which was increasingly unacceptable in North America. It was, to say the least, a tall order.

The Isolastic system used to keep engine vibration from the rider, using a totally rubber-mounted engine, gearbox, swingarm, and rear wheel in one unit. The frame used a single large spine downtube that carried oil, a design dating back to the Pierce Four of 1909!. [NorVil]
Breakthrough

On the train back to Birmingham, they got to work. Trigg suggested rubber-mounting the engine to combat vibes, which of course had been one of the P10’s bugbears, but Hooper thought he had a solution. Engine, gearbox and swinging arm, as a single unit, would be rubber mounted, but with the swinging arm mounted solidly to the engine to overcome the chain pull problem. If the whole assembly was kept in a single plane fore and aft, the wheels would stay in line, and there was a chance the bike would still handle well.

Back at his drawing board, Bob Trigg got to work. Rubber specialists Metalastic were too busy to help, but did tell him that the rubber had to be a high enough rate to absorb the vibration – if the rate was too low, the vibes would simply destroy the mounts. In quick time, an initial prototype was put together and tested on the factory’s internal roads. The new system did cut vibration, but only over 6500rpm. Norton’s Engineering Director Stefan Bauer, who had little motorcycle experience but was a lateral thinker, told them to slice the mounts in half. Trigg thought that would reduce their life, but did as he was told – now they cut vibration over 4000rpm. Again, Dr Bauer said, slice them in half.

“We took the bike up the road,” said Bob Trigg, “and it was like being in an aeroplane, bumping along at low revs and then at 2300rpm it would smooth out. And that was great, because you could still feel a big twin under you at very low revs, but it took all the hassle out of vibration when riding.” At that point, the Norton Commando was born.

The winning team: a publicity shot of the Norton-Villiers design team with their handiwork, a leap forward in 1960s design, and a path forward for Norton, at least temporarily. Love for the Commando is still strong, and keeping one on the road is easier today than in 1970. [NorVil]
Nearly There

Given the time constraints, Bob Trigg assumed they would modify Norton’s existing Featherbed frame for the new bike, but Dr Bauer insisted they design from first principles. Dismissing the hallowed chassis as “a Christmas tree,” he sent Trigg back to the drawing board, and the result was elegant: a frame with almost every tube straight, which weighed only 24lb. Some existing parts were retained, like Norton’s excellent Roadholder forks. Then there was the Atlas engine, a long-stroke iron-barrel vertical twin of 745cc: the design harked back to Hopwood’s 1949 original, but as a 750cc it was bursting with torque and power – a claimed 58bhp at 6500rpm, not that anyone could ride it at those revs. The Atlas’s separate four-speed gearbox was carried over too, but the Commando did get a new diaphragm clutch to reduce lever effort and a triplex primary drive with single-bolt alloy cover.

As the summer of ’67 drew to a close, the final touches were made. Bob Trigg had already given the Commando its distinctive canted forward engine with rear shocks at a similar angle, but Dennis Poore wanted radical styling to match the new concept, calling in the design consultancy Wolff Ohlins. They came up with the one-piece seat and tail unit blending into the tank – the Commando Fastback.

Not everyone loved the Fastback styling, which was inspired by American flat-track racing practice of the fiberglass unibody.

Hastily sprayed a shotgun silver metalflake, and with just 1000 test miles under its belt, the prototype Commando made it to Norton’s stand at the Earls Court Show in September. Years later, Bob Trigg reflected on those manic eleven weeks, “I worked all the hours God sent and lost over a stone in weight, but we did it. We all worked on it as a good team, and we couldn’t have done it any other way.”

The Commando was a miracle of expedience, as it became a motorcycle for the ages, but it could only have been built under the direst of financial and time constraints.  It won ‘Motorcycle of the Year’ for five years running in Motorcycle News reader’s polls, and even hardened journalists were amazed how good the Commando turned out to be. There should be a lesson for future designers in the story, but perhaps the lesson is one of management: Dennis Poore applied the pressure, and Norton’s development team produced the diamond.

Norton’s advertising of the Commando blended two types of Eros: alluring females and the promise of raw power. [NorVil]

 

Peter Henshaw is a writer in England.  His book, ‘Royal Enfield Bullet: The Complete Story’ will be published by Crowood Press shortly.

 

Related Posts

The Vintagent Trailers: Motorcycle Man

Racing legend Dave Roper is hardly an…

The Vintagent Classics: Kid Speed

Two auto racers compete for the same…

The Vintagent Selects: Janus Motorcycles

Motorcycles are like architecture: They…



Subscribe to Our Weekly Newsletter